Installing cedar shake siding is an excellent Masonite siding replacement. Cedar shakes are produced from wood and do not call for much care to keep in good shape and looking attractive. Masonite, while it has improved a lot through the years, still needs a lot more work to maintain its beautiful look and prevent corrosion than other, affordable siding. Cedar shake siding features none of these natural concerns. Here is how to buy, mount, and maintain it.
Purchasing Cedar Shake Siding
When you choose to buy a new material for the exterior of your home, where do you search? Where do you look for supplies for installing cedar shake siding and Masonite siding replacement? An excellent internet search or a stop by at a local home improvement store should get you started. When you call the provider, they should be able to quote prices for the supplies. You then choose the cedar shake siding that you want for your house.
Be sure you allow the firm learn about any kind of specific requirements you have or time limits you have to deal with before you pay for the siding. Most deliver to your house, thus all you must do is wait.
Installing Cedar Shake Siding
Masonite siding replacement will demand eliminating or sanding any ruined or uneven siding before installation of the cedar shakes. You may set up cedar shake siding over the old siding, however, if the previous stuff is not sleek and even, the shakes won’t appear correct.
- Beginning at the bottom of your house, mark a straight chalk line at the place where you like the end of your cedar shake siding to reach.
- Along that line, install basic wooden shingles. You need to use number one shingles here. Don’t trouble yourself regarding matching the rest of your siding considering that the shingles won’t exhibit when you are finished.
- Mount your first row of cedar shakes within the starter shingles. You may stagger the shakes, but don’t allow the base go lower than the wooden beginner strip.
- Nail every shake down. You must set a nail on every section, up to ten inches from its bottom. Make sure the nails are all at the same level with each other, even when you prefer to stagger the shakes.
- Do it again, marking another chalk line for every additional row of cedar siding shakes, doing the job from bottom to top.
- You’ll have to cut the siding with a saw around windows, doors, etc.
Caring For Cedar Shake Siding
Immediately after installing cedar shake siding or Masonite siding replacement, you must fix anything that fails with your house exterior. Staggering the cedar shake siding and utilizing cedar siding no bigger than eight inches across can help prevent buckling due to age. Be sure you take the time to check out the cedar siding once in a while to assure it’s in good fix. In this way, you’ll be able to discover concerns before they become a severe difficulty. Now and then, employ a little bit of sealer to help the cedar siding shakes resist the weather.
Hammer any loose nails. If you have cracked shakes, place a metallic shim beneath the split and hold it in position using a hammer and nails. You will eventually change the cedar shakes; this really is uncomplicated. Merely take away the aged shake and install a new one. If you’re worried about the new shake not matching the other shingles, just store a few cedar siding shakes outside the house. They’re going to weather at the same speed as the cedar siding shakes for your house, thus when you take them for replacements, they will coordinate properly.
Installing cedar shake siding is an excellent Masonite siding replacement because it doesn’t value nearly as much to renovate, nor do cedar siding shakes call for the same degree of care as Masonite.
